top of page
charging station manufacturing_edited.jpg

SECC Products

A Charging Station Designed For Safe And Fast Charging And Convenient And Practical

Introduction:

SECC products are specially designed by AFAX POWER for charging stations (DC or AC-DC integrated) to realize interactive conversion of communication protocols (European standard / American standard - national standard). It has the characteristics of small size, high integration and reliable quality. The product has been used and tested in over 40 regions and countries.

  1. Complies with DIN70121: 2014 standard, with all seven-layer protocols specified by the standard.

  2. Compatible with ISO15118-2: 2014 standard.

  3. Has a communication interface that integrates charging guidance and PLC communication, communicating with the EV through CP and PE signal lines.

  4. Equipped with a CAN interface, serving as a user data interface to communicate with the charger control system.

  5. Equipped with a charging gun output voltage detection interface.

  6. Equipped with charging gun positive and negative temperature detection interfaces.

  7. Reserved for zero-crossing detection interface.

Functions 

​

1. Support DIN70121-2014 DC Charging Protocol;

2. Support ISO15118-2014 DC EIMCharging Protocol;

3. Support ISO15118-2014 AC EIMCharging Protocol;

4. Support IEC61851-1BC Mode AC Charging;

5. DIN7012 Protocol and ISO15118 Protocol for selection;

6. AC charging and DC charging modes are configured by software parameters or hardware switches;

7. Automatic selection of ACEIM mode and BC mode for AC charging;

8. The communication protocol with the charging station is a custom protocol and can be expanded according to needs;

9. Able to output diagnostic information in real time from the serial port to facilitate fault diagnosis;

10. Ability to record fault and event logs, and download logs from the serial port or CAN port.

SECC2.png
SECC3.png

Parameters

​

1. Power supply voltage range 9~28V DC, typical value 12V DC/24V DC;

2. Power consumption≤5W;

3. Operating ambient temperature -40～+85℃;

4. 1 CAN communication interface, used for communication with the charging station

     controller and software upgrade;

5. 1 RS232 communication interface for log output and software upgrade;

6. Two temperature sensor acquisition inputs for charging gun temperature monitoring;

7. According to standard requirements, a zero-crossing detection interface is reserved;

8. CAN2.0 Interface, Baud Rate Support 100/125/250/500kbps.

bottom of page